IDE/ATAPI controllers haven't been used in years because SATA has been around for years. And if you don't even have an optical drive, then depending on your BIOS configuration, you may not see ANY regular disk controller items in device manager and will instead see a storage controller device in a different category, called 'Storage controllers' on Windows 10 (and I think called 'Storage. IDE ATA/ATAPI Controller missing Hello, I have one year old HP M9400T that I purchased with Windows Vista 64bit. I have just upgrade to Windows 7 Ultimate 64bit, and after installing Nero, I tried to burn a CD, but burning took a bout 20 minutes (I used to burn a DVD in less than 7).
This section describes the tasks that you must complete before you test an ATA/ATAPI controller by using the Windows Hardware Lab Kit (Windows HLK):
Hardware Requirements
The following hardware is required for testing an ATA/ATAPI controller. You might need additional hardware if the test device offers other features. To determine whether additional hardware requirements apply, see the test description for each test that appears for the device in Windows HLK Studio.
Note
With the exception of the test computer and test controller, all hardware that is involved in the test must already have a logo.
Note
To certify your product for use on servers, the test computer must support four processors and a minimum of 1 GB of RAM. These system capabilities are required to test the Rebalance, D3 State, and Multiple Processor Group functionality of the device and driver. You do not need a computer that actually has more than 64 processors to test your device. Additionally, the server system(s) being used for device or driver testing must have Server Core installed prior to testing. For more information see Windows Server Installation Options.
If you use a pool of test computers to test devices, at least one computer in the pool must contain four processors and a minimum of 1 GB of RAM. Additionally, that computer must contain the device and the driver that you want to test. If the driver is the same on all the computers in the pool, the system creates a schedule to run against all test computers.
For tests that do not include a driver to test, such as hard disk drive tests, the Windows HLK scheduler constrains the tests that validate the device's and driver's rebalance, D3 state, and multiple processor groups functionality to run on the default test computer. You must manually configure this computer to have multiple processor groups. The default computer is the first test computer in the list. Test personnel must make sure that the first test computer in the list meets the minimum hardware requirements.
Note
Except for para-virtualization drivers (as defined by the WHCP Policies and Processes document), you may not use any form of virtualization when you test physical devices and their associated drivers for server certification or signature. All virtualization products do not support the underlying functionality that is required to pass the tests that relate to multiple processor groups, device power management, device PCI functionality, and other tests.
Note
Ide Ata Controller Drivers
Multiple Processor Groups SettingYou must set the value for the processor group size for Hardware Lab Kit testing of Windows Server 2008 R2 and later device drivers for certification. This is done by running bcdedit in an elevated command prompt window, using the /set option.
The commands for adding the group settings and restarting are as follows:
Pinball computer game. The commands for removing the group settings and rebooting are as follows:
Note
Code Integrity Setting
The Virtualization Based Security feature (VBS) of Windows Server 2016 must be enabled using Server Manager first.
Once that has occurred, the following Registry key must be created and set:
Software Requirements
The following software is required for testing an ATA/ATAPI controller:
Test Computer Configuration
There are three possible configurations for testing ATA/ATAPI controllers:
Before you test an ATA/ATAPI controller in any of the three usage scenarios, make sure that the test computer is in the ready state. If a test requires parameters to be set before the test is run, a dialog box appears for that test. Review the specific test topic for more information.
Some Windows HLK tests require user intervention. When you run tests for a submission, it is a best practice to run the automated tests in a block separately from manual tests. This prevents a manual test from interrupting completion of an automated test.
Warning
When testing storage devices, we strongly recommend that you complete all Device Fundamentals tests before starting storage tests. Storage tests will reconfigure your test device, leaving the device in a state unsuitable to support Device Fundamentals tests. The following configurations provide steps to create volume on the storage test device. This is important to complete the Device Fundamental part of testing (DevFund).
Add-in RAID controller test configuration
To configure the test computer to test an ATA/ATAPI controller in an add-in RAID configuration, follow these steps:
Integrated RAID controller test configuration
To configure the test computer for testing of an ATA/ATAPI controller in an integrated RAID configuration, follow these steps:
Ide Ata Atapi Controllers Windows 10
Non-RAID controller test configuration
To configure the test computer to test an ATA/ATAPI controller in a non-RAID configuration, follow these steps:
Ide Ata Atapi Controllers Driver Update Windows 7
Scan performed on 4/25/2017, Computer: - Windows 7 64 bitIde Ata Atapi Driver
Outdated or Corrupted drivers:10/21
Ide Ata/atapi Controllers Driver Update
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |